Shure FP33 Portable 3-Channel Remote Stereo Mixer

The FP33 is a 3-input, 2 output, portable stereo mixer specifically designed for remote audio recording, electronic field production, electronic news gathering, and location film production.

FP33 features include:

High-quality, sealed input potentiometers, Dynamic range of over 100dB 48V phantom, 12V phantom power, and 12V T (A-B) power, LED indicators of input levels, output peaks, limiter action, and low battery. Pop-up pan pots and a link switch to couple inputs 2&3 into a stereo pair, Mix Bus to connect an additional FP33 or FP32A, comprehensive headphone monitoring control including headphone MS stereo matrix, internal DIP switches for over 4,000 customized setups. The FP33 has an exceptionally low self-noise and a wide dynamic range that are perfect for use with DAT and other digital recording media.

Inputs	3 - Balanced xLR Inputs
Output	2 - Balanced xLR Outputs
Monitor/Headphone Out	2 - 1/4" TRS Phone / 3.5mm stereo headphone outputs.
ALT I/O	Monitor In 3.5mm jack Tape Output 3.5mm jack
Link Input/Output	Mix BUS connection: mini 3-Pin xLR connection
Impedance	Input Mic - (designed for use with 19 to 600 ohms source) 1k ohm internal, -10 dBV clip level Line - (designed for use with < / - 1k ohms source) 50k ohms internal, +36 dBV clip level Monitor - (designed for use with < / - 1k ohms impedance source) 10k ohms internal, +21 dBV clip level Outputs Mic - (designed for use with Low-Z input source) 1 ohm internal, -31 dBV clip level Line - (designed for use with 600 ohms source) 150 ohms internal, +18 dBm clip level Tape - (designed for use with > 10k ohms source) 2.2k ohms internal, +3 dBV clip level Headphones - (designed for use with 8 to 200 ohms source) 300 ohms internal, +11 dBV clip level
Gain	Low-Z Mic Input: Line 78dB, Mic 28dB, Headphone 89dB, Tape 66dB Line: Line 28dB, Mic -22dB, Headphone 39dB, Tape 16dB Monitor: Headphone 11dB
Hum & Noise	Output Noise: Master level fully CCW: < / - 100dBV, 20 to 20,000 Hz Master level fully CW: < / - 80dBV, 20 to 20,000 Hz Equivalent Input Noise: -127 dBV with 150 ohm source, 20 to 20,000 Hz
Frequency Response	20 to 20,000 Hz +/- 2.0 dB (channel controls centered)
Distortion	0.25% THD a +4 dBm output, 50 to 20,000 Hz
Metering	VU Left/Right Channel Output Level Meters: 0 VU preset at +4dBm output level
Controls	Inner/Outer Ring pots: Master Output Level (L/R) and Headphone Monitor Level Control pots: Input Channels 1-3 Pan Control pots: Input Channels 1-3 Switches: Power, Mic/Line Level Input & Output, Low-Cut Filter (channels 1-3), 1kHz Oscillator, Link, Output Peak Limiter, Meter Lamp/Battery Check Switch, Monitor Input Switch Buttons: Slate Button
Control Voltage Out	No
Phantom Power	12 Volt: through matched 680 ohms 48 Volt: through matched 6.8k ohms 12 Volt T (A-B): through matched 180 ohms
Operating Temperature	Operating: 0 to 60 degrees C (32 to 140 degrees F) Storage: -40 to 85 degrees C (-40 to 185 degrees F)
Power	Internal: Two 9V alkaline batteries External: 12-30 Vdc to dc In jack; non-polarized Current Drain: Approximately 41mA (idle) at 18 V Battery Life: 8 hours minimum, typical
Dimensions	2.26 x 7.24 x 6.33 (58 x 184 x 161mm) (H x W x D)
Weight	3.5 lbs (1.6 kg)

Additional Features:

Exceptionally quiet design, suitable for use with DAT and other digital formats

Extended frequency response of 20 Hz-20 kHz

Dynamic range greater than 100 dB

Transformer balanced inputs and outputs for superior rejection of RFI and electromagnetic hum

Three selectable mic/line inputs

Two selectable mic/line outputs

Wide range input gain controls handle hot signal levels without attenuators

48 V phantom, 12 V phantom, and 12 V T (A-B) microphone power

Pop-up pan pots

Link switch gangs inputs 2 and 3 to control a stereo microphone

Switchable low-cut filters on each input

Bi-color LED signal presence and peak indicator for each input

Professional VU meters with selectable timed or toggled backlighting

Dual clutched Master gain control for simultaneous or separate adjustment of output levels

Bi-color LED limiter and peak indicator for each output

Two linkable output peak limiters with adjustable thresholds and release times

Slate microphone and slate tone with selectable functions

Isolated two-way talk-back using Monitor In and modified Slate Mic/Tape Out jack

High tolerance 3.5 mm jacks for stereo Tape Out and Monitor In

1 kHz tone oscillator

Mix bus jack and cable to link FP33 or FP32A mixers

Headphone monitor mode switch to select L, L+R (Mono), R, or Stereo

Internal headphone level adjustments to balance post-master audio levels and Monitor In levels at the headphone output

Selectable M/S decoding circuit for headphone monitor.

Mixer/Monitor In switch (locking and momentary)

Internal Monitor defeat switch for split-feed headphone operation

Headphone volume control

1/4 in. and 3.5 mm jacks for stereo headphone outputs.

Customized operation via internal DIP switches, trim pots, slide switches, and optional jumpers

Regulated voltage rails (+/-15 Vdc) provide exceptional headroom

Bi-color power On/Off LED

Battery check switch and low battery warning LED

Non-polarized external power jack

External power operating range of 12 to 30 Vdc

Soft-touch, color coded control knobs with raised position indicators

Metal XLR input and output connectors

Rugged, plated metal chassis

Operates for 8 hours on two 9 V alkaline batteries

Includes carrying case, shoulder strap, and mix bus cable

Dale Pro Audio guarantees that our prices will be competitive and that shopping with us will always be a great value.
If you've found a deal that looks better than ours, we want to hear from you!

Dale Pro Audio

Free Shipping Offer

Qualifying items have this graphic:

Restrictions

Shure FP33 Portable 3-Channel Remote Stereo Mixer

Customer Service

Policies

About Dale Pro Audio

Categories